跳至主要内容

Assignment 2 - The Ferrari 250 GTO

This assignment is a group work which uses the skill we learned in this course before to make a model of the Ferrari 250 GTO

First thing is making the template of the car. We download the software Fusion 360 and we got the file for laser cutting. We use 3mm MDF as our material of this template. We put the pieces together and got the template model.



And use the masking tape to cover it, and make a surface of the model, it will be look better and look like a car model.
We according to the shape of the car, we decide to separate it to 7 parts, so each of members in our group got a part to work .






I got the left back part of the car. In order to get the shape of my part, I used the tracing paper to got he shape, and used the metal cutter to cut it.




And use the hammer to hit the line where need to curve. next step is try to fit the metal to template and find where need to improve. One thing I know from tutor is not hitting the metal directly on template. 😛😛😛






use the smaller side of hammer and hit it slightly to make it round and looks natural. 
next step is making the template of a small hole which is on my part. 




Next is using the english weel to make it smooth, and try to connect with the other part of my group member, cut off the superfluous part， use the sand paper machine to make it smooth.


Last step is using the Brasso Metal Polish to polish it.
Finally I finish my part.Those are some image of my own work and the final car model of our group.





  


compare with the real Ferrari 250GTO




















评论

发表评论

此博客中的热门博文

Tutorial for the Torus and Reflection

Step 1：Preparation Use  the guillotine to cut  the aluminium sheet to the size what you want. Step 2: Use the cylindrical wood as template to bend the aluminum sheet, give it a initial circular shape. Step 3: Use  round plastic hammer to hit the mid part of the sheet, shape it to a concave shape (hit the sheet uniformly, keep the curving shape of the sheet.) Keep hitting until  the whole mid part of sheet is concave (shows in next picture) Step 4: This is the time to make the two sides of sheet concave. First, use hammer to hit the side of this curve part, make it curve upward. ( use hand to hold the sheet stand, this will be easy to concave this part) Give an initial curve shape of the sheet and do next step. Step 5:  Refine the reverse curve. After defined all the parts of the sheet,  use a polishing hammer with a rounds metal stand to make the curve part more accurate and smooth. C arefully stretch and shap...
发表评论
阅读全文

The Torus

Step 1: put metal on the cylindrical , bend it. Step 2: use hammer to hit the mid part of metal. Step 3: use sandbag and hammer to hit the side of the sunken part. make it curve upward. Step 4: hit the smaller curved parts on the bending steel Step 5: use englishwheel to make it smooth. Step 6: Polish it .
发表评论
阅读全文

The tray

Step 1 use metal cutter to cut the metal according to wood template Step 2: Polish each sides, make it smooth. Step 3: use wood template and hammer to hit each side , make it upward. Step 4: Trim the edge Step 5 : Fail!!!!!  can not match my partner's tary. Step 6: make another one
发表评论
阅读全文